HW and HWT Casing

Short Description:

TDS Wire Line Casing offering includes the industry standard ‘W’ design in all sizes as well as the commonly used ‘WT’ design used in the larger diameter product. Carbon steel tubing, produced to the Di-Corp tubing specification ensures a tough, strong, straight, concentric product. All Casing is precision machined to an industry ISO standard ensuring a quality joint fit as well as compatibility with existing industry product.

Message Email

Product Detail

Product Tags

Casing		BW	NW	HW	HWT	PWT
Outer diameter OD	mm (in)	73.03 (2.88)	88.90 (3.50)	114.30 (4.50)	114.30 (4.50)	139.70 (5.50)
Inner diameter ID – box shoulder	mm (in)	60.33 (2.38)	76.20 (3.00)	101.60 (4.00)	101.60 (4.00)	127.00 (5.00)
Wall thickness	mm (in)	6.35 (0.25)	6.35 (0.25)	6.35 (0.25)	6.35 (0.25)	6.35 (0.25)
Pin end length	mm (in)	63.50 (2.50)	69.85 (2.75)	76.20 (3.00)	63.50 (2.50)	63.50 (2.50)
Thread pitch	mm (in)	6.35 (0.25)	6.35 (0.25)	6.35 (0.25)	10.16 (0.40)	10.16 (0.40)
Weight	kg/m (lb/ft)	11.71 (7.87)	12.96 (8.71)	16.95 (11.39)	16.95 (11.39)	20.94 (14.07)
Casing content volume	L/m (gal/ft)	4.19 (0.34)	4.56 (0.37)	8.11 (0.65)	8.11 (0.65)	12.67 (1.02)
Hole volume	L/m (gal/ft)	4.45 (0.36)	6.62 (0.53)	10.84 (0.87)	10.84 (0.87)	16.18 (1.30)
Casing/hole annulus volume	L/m (gal/ft)	0.27 (0.02)	0.41 (0.03)	0.58 (0.05)	0.58 (0.05)	0.85 (0.07)
Min yield strength	MPa (psi)	524.00 (76000.00)	524.00 (76000.00)	524.00 (76000.00)	524.00 (76000.00)	524.00 (76000.00)
Min tensile strength	MPa (psi)	599.84 (87000.00)	599.84 (87000.00)	599.84 (87000.00)	599.84 (87000.00)	599.84 (87000.00)
Displacement volume	L/m (gal/ft)	1.33 (0.11)	1.65 (0.13)	2.15 (0.17)	2.15 (0.17)	2.66 (0.21)
Burst pressure – box shoulder	MPa (psi)	30.30 (4394.78)	24.24 (3515.00)	19.56 (2837.33)	14.98 (2172.33)	12.25 (1777.36)
Burst pressure – midbody	MPa (psi)	79.74 (11565.22)	65.50 (9500.00)	50.94 (7388.89)	50.94 (7388.89)	41.68 (6045.45)
Collapse pressure – midbody	MPa (psi)	72.81 (10559.55)	60.82 (8821.43)	48.11 (6978.40)	48.11 (6978.40)	39.79 (5770.66)

Standard geometric data is based on published industry values as described under the International Standard for ISO 10097-2. Some of the recorded values are calculated by TDS Engineering Department. The care and handling, as well as drilling conditions, practices and equipment used, will also play a significant role in the ultimate capacity and performance.