TDS 910 Volledige hydraulische DTH boorplatform

The TDS910 is an integrated DTH drilling rig for hard-rock drilling applications. The 2026 catalogue specifies a hole diameter range of 90–138 mm and a drilling depth of 21 m. It is equipped with a 194 kW Cummins engine and a single-stage Bosi compressor rated in the catalogue at 15 m³ and 18 bar. The rig uses a steel-beam guide and motor-and-chain feeding, with a 6+1 drill magazine for 3 m, 76 mm drill rods. The catalogue also lists an Eaton 6K Series rotation motor, a maximum rotary torque of 4000 N·m for hard rock, a 4-inch high-pressure DTH hammer, and a 115 mm drill bit.

Productgegevens

Rotatie

Dubbele draaimotor Hoger koppel, effectief verminderen vastgevangen tarief.

Chassissysteem

Chassis van zware bouwmachines, sterke structuur, sterke doorgaanbaarheid.

Controlesysteem

Logisch controlesysteem heldere bedrading, eenvoudig onderhoud.

Machtssysteem

Cummins dieselmotor.

Luchtcompressorsysteem

Ingersoll rand luchtcompressor Hoge druk grote verplaatsing.

产品参数表

Drilling rig model TDS910
Hole diameter 90–138 mm
Drilling diepte 21 m
Engine Cummins 194 kW
Compressor Single-stage compression, Bosi 15 m³, 18 bar
gewicht 10.5 t
Drill magazine 6+1 (3 m – 76 mm drill rod)
Guide Steel beam
Feed form Motor + chain feeding
Feed length 1100 mm
Rotation motor Eaton 6K Series
Pump Permco
Valve Qiangtian
Dust Xuanhua 14-Core
Rotate torque 4000 N·m (for hard rock)
Rotation speed 0–100 r/min
Outer dimensions 8800 × 2300 × 2600 mm
Maximum thrust 12 kN
Maximum hoist force 18 kN
Maximum feeding speed 1 m/s
Feeding stroke 3400 mm
Travel speed Fast: 3 km/h; Slow: 1.5 km/h
Electric system Imported electrical components, IP56 waterproof and dustproof
DTH hammer 4 in high-pressure DTH hammer
Drill bit 115 mm drill bit

Productspecificaties

Neem contact op

© Copyright 2026 by Beijing The Drill Store Machinery Equipment Co, Ltd.

nl_NLDutch