Factory For Down The Hole Hammer Bits - Vermeer DitchWitch HDD Drill Rod & Pipe for Directional Drilling – TDS

Short Description:

Message Email

Product Detail

Product Tags

Feedback (2)

We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Water Well Drill Pipe, Forged Drill Rod Manufacturers, Diamond Coring Drilling Rigs, Trust us and you will gain more. Please feel free to contact us for more information, we assure you of our best attention at all times.

Factory For Down The Hole Hammer Bits - Vermeer DitchWitch HDD Drill Rod & Pipe for Directional Drilling – TDS Detail:

1-Piece Internal & External (IEU) Forged Drill Pipe

Our IEU integral forged or 1-Piece forged drill pipe is made up solely from one piece of material. The pipe has the same chemical makeup for the threaded connections and the mid-body tube with no weld zone between them.

Inertia Welded Drill Pipe

Our inertia welded drill pipe is made from three separate pieces that include the mid-body tube and two threaded connections or tool joints. The interim weld process is a solid-state welding technique that forges metal together without causing a melt to occur. Because there is no melt product produced during the inertia weld, there is no recast metal or grain enlargement.

Specificationå¯¼èªæ

Compatible with Vermeer HDD Rigs

Rig Compatibility*	Thread	Length		Pipe OD		Joint OD		Pin Length (mm)	Max. Torque (Nm)
Rig Compatibility*	Thread	mm	ft	mm	inch	mm	inch	Pin Length (mm)	Max. Torque (Nm)
D7x11, D10x15	#200	1,829	6	42	1.66	48	1.88	50.7	2,040
D20x22, D23x30	#400	3,048	10	52	2.06	57	2.25	63.5	3,525
D24x40	#600	3,048	10	60	2.38	67	2.63	63.5	5,695
D33x44, D36x50	#650	3,048	10	60	2.38	70	2.75	63.5	6,800
D33x44, D36x50	#650	4,572	15	60	2.38	70	2.75	63.5	6,800
D36x50, D40x55	#700	3,048	10	67	2.63	79	3.1	76.2	7,457
D36x50, D40x55	#700	4,572	15	67	2.63	79	3.1	76.2	7,457
D50x100, D60x90	#900	3,048	10	73	2.88	83	3.25	88.9	12,202
D50x100, D60x90	#900	4,572	15	73	2.88	83	3.25	88.9	12,202

Compatible with Ditch Witch HDD Rigs

Rig Compatibility*	Thread	Length		Pipe OD		Joint OD		Pin Length (mm)	Max. Torque (Nm)
Rig Compatibility*	Thread	mm	ft	mm	inch	mm	inch	Pin Length (mm)	Max. Torque (Nm)
JT2720	1.94	3000	9.84	60	2.38	70	2.75	75	4340
JT20	1.94	3000	9.84	52	2.06	67	2.63	75	2980
JT2720M1, JT3020M1	2.11	3000	9.84	60	2.38	76.2	3	84.7	5420
JT25/30	2.11	3000	9.84	60	2.38	70	2.75	84.7	5420
JT4020	2.4	4500	14.76	73	2.88	82	3.23	99.5	6800
JT4020M1	2.59	4500	14.76	76	3	89	3.5	91.5	6800
JT7020M1, JT8020M1, JT100M1	3.27	4500	14.76	89	3.5	102	4	132.5	13,560

Product detail pictures:

Related Product Guide:

Our commission is always to provide our customers and clientele with best quality and aggressive portable digital products for Factory For Down The Hole Hammer Bits - Vermeer DitchWitch HDD Drill Rod & Pipe for Directional Drilling – TDS , The product will supply to all over the world, such as: Turkey, Kuwait, India, Our company has always insisted on the business principle of "Quality, Honest, and Customer First" by which we have won the trust of clients both from at home and abroad. If you are interested in our products, please do not hesitate to contact us for further information.

Bar Air Compressor

Drilling Rig

Dth Hammer Bit Supplier

Dth Hammer Exporter

Dth Hammer Supplier

Pdc Bit

Rc Drill Pipe

Reverse Circulation Hammers

Tungsten Carbide Rock Drill Bit

This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.