Factory making Rc Drill Hammer - Reverse Circulation Drilling Hammer Bit – TDS

Short Description:

Message Email

Product Detail

Product Tags

Feedback (2)

The key to our success is "Good Product or service High quality, Reasonable Rate and Efficient Service" for Self Drilling Anchor, Dth Hammer Bits Manufacturers, Bw Casing Factory, We're going to make higher efforts that can help domestic and international potential buyers, and produce the mutual advantage and win-win partnership between us. we're eagerly waiting for your sincerely cooperation.

Factory making Rc Drill Hammer - Reverse Circulation Drilling Hammer Bit – TDS Detail:

RC hammers and bits are used in hole drilling in mines, hydrology and water well, geothermal well, geothermal air conditioning well, geologic exploration, gravel stratum, etc Especial suitable for complicated formation (Formation loose, difficult to drilling and unstable of hole wall), exhausting for deep hole, environment protection.

The drill cuttings travel around the inside of the cyclone until they fall through an opening at the bottom and are collected in a sample bag. For any drill hole there will be a large number of sample bags, each one marked to record the location and drilling depth that the sample was obtained.

The collected series of sample bag cuttings are later taken for analysis to determine the mineral composition of the drill hole. The analysis results of each individual bag represents the mineral composition at a particular sample point in the drill hole. Geologists can then survey the drilled ground analysis and make decisions about the value of the overall mineral deposit.

TDS RC hammer Model
Hammer Model	Hole Range (mm)	External Diameter (mm)	Weight(without bit) mm	Bit shank	Working Pressure	Connection Thread
RC4108	115-130	108	78	RE410	1.5-3.0 Mpa	REMET 3.1/2″-4″ METZKE 3.1/2″
RC5116	120-135	116	85	RE543	1.5-3.0 Mpa	REMET4″ METZKE 4″
RC5121	136-133	121	73	RE512	1.5-3.0 Mpa	REMET 4″-4.1/2″ METZKE4″-4.1″
RC5126	140-152	126	95	RE5126	1.5-3.0 Mpa	REMET 4.1/2″ METZKE 4.1″
RC5130	140-146	130	82	RE513	1.5-3.0 Mpa	REMET 4.1/2″ METZKE 4.1″

Product detail pictures:

Related Product Guide:

In order to best meet client's needs, all of our operations are strictly performed in line with our motto "High Quality, Competitive Price, Fast Service" for Factory making Rc Drill Hammer - Reverse Circulation Drilling Hammer Bit – TDS , The product will supply to all over the world, such as: Philadelphia, Swaziland, British, To let customers be more confident in us and get the most comfortable service, we run our company with honesty, sincerity and best quality . We firmly believe that it is our pleasure to help customers to run their business more successfully, and that our professional advice and service can lead to more suitable choice for the customers.

Down The Hole Hammer Sizes

Drifter Rods

Dth Hammer Exporter

Hw Casing

Mining Down The Hole Drilling Rig

Rc Dth Hammer

Retrac Bit

Rock Drilling Rig

Single Stage Compression Air Compressor

Tungsten Carbide Bit

The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!