Hot-selling Down The Hole Drill - Reverse Circulation Drilling Hammer Bit – TDS
Hot-selling Down The Hole Drill - Reverse Circulation Drilling Hammer Bit – TDS Detail:
RC hammers and bits are used in hole drilling in mines, hydrology and water well, geothermal well, geothermal air conditioning well, geologic exploration, gravel stratum, etc Especial suitable for complicated formation (Formation loose, difficult to drilling and unstable of hole wall), exhausting for deep hole, environment protection.
The drill cuttings travel around the inside of the cyclone until they fall through an opening at the bottom and are collected in a sample bag. For any drill hole there will be a large number of sample bags, each one marked to record the location and drilling depth that the sample was obtained.
The collected series of sample bag cuttings are later taken for analysis to determine the mineral composition of the drill hole. The analysis results of each individual bag represents the mineral composition at a particular sample point in the drill hole. Geologists can then survey the drilled ground analysis and make decisions about the value of the overall mineral deposit.
| TDS RC hammer Model | ||||||
| Hammer Model | Hole Range (mm) | External Diameter (mm) | Weight(without bit) mm | Bit shank | Working Pressure | Connection Thread |
| RC4108 | 115-130 | 108 | 78 | RE410 | 1.5-3.0 Mpa | REMET 3.1/2″-4″ METZKE 3.1/2″ |
| RC5116 | 120-135 | 116 | 85 | RE543 | 1.5-3.0 Mpa | REMET4″ METZKE 4″ |
| RC5121 | 136-133 | 121 | 73 | RE512 | 1.5-3.0 Mpa | REMET 4″-4.1/2″ METZKE4″-4.1″ |
| RC5126 | 140-152 | 126 | 95 | RE5126 | 1.5-3.0 Mpa | REMET 4.1/2″ METZKE 4.1″ |
| RC5130 | 140-146 | 130 | 82 | RE513 | 1.5-3.0 Mpa | REMET 4.1/2″ METZKE 4.1″ |
Product detail pictures:
Related Product Guide:
Sticking for the belief of "Creating items of top of the range and creating buddies with people today from all over the world", we normally put the interest of shoppers in the first place for Hot-selling Down The Hole Drill - Reverse Circulation Drilling Hammer Bit – TDS , The product will supply to all over the world, such as: moldova, Boston, Sri Lanka, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and solutions and good service for domestic and international customers.
By Caroline from Cyprus - 2017.04.08 14:55
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Lindsay from Thailand - 2017.06.16 18:23
