One of Hottest for Dth Pipe - Reverse Circulation Drilling Hammer Bit – TDS

Short Description:

Message Email

Product Detail

Product Tags

Feedback (2)

Sticking towards the theory of "Super Good quality, Satisfactory service" ,We are striving to become a superb business enterprise partner of you for Hydraulic Water Well Drilling Rig, Threaded Button Bits, Air Compressor Water Well Drill, Adhering to the business philosophy of 'customer first, forge ahead', we sincerely welcome clients from at home and abroad to cooperate with us.

One of Hottest for Dth Pipe - Reverse Circulation Drilling Hammer Bit – TDS Detail:

RC hammers and bits are used in hole drilling in mines, hydrology and water well, geothermal well, geothermal air conditioning well, geologic exploration, gravel stratum, etc Especial suitable for complicated formation (Formation loose, difficult to drilling and unstable of hole wall), exhausting for deep hole, environment protection.

The drill cuttings travel around the inside of the cyclone until they fall through an opening at the bottom and are collected in a sample bag. For any drill hole there will be a large number of sample bags, each one marked to record the location and drilling depth that the sample was obtained.

The collected series of sample bag cuttings are later taken for analysis to determine the mineral composition of the drill hole. The analysis results of each individual bag represents the mineral composition at a particular sample point in the drill hole. Geologists can then survey the drilled ground analysis and make decisions about the value of the overall mineral deposit.

TDS RC hammer Model
Hammer Model	Hole Range (mm)	External Diameter (mm)	Weight(without bit) mm	Bit shank	Working Pressure	Connection Thread
RC4108	115-130	108	78	RE410	1.5-3.0 Mpa	REMET 3.1/2″-4″ METZKE 3.1/2″
RC5116	120-135	116	85	RE543	1.5-3.0 Mpa	REMET4″ METZKE 4″
RC5121	136-133	121	73	RE512	1.5-3.0 Mpa	REMET 4″-4.1/2″ METZKE4″-4.1″
RC5126	140-152	126	95	RE5126	1.5-3.0 Mpa	REMET 4.1/2″ METZKE 4.1″
RC5130	140-146	130	82	RE513	1.5-3.0 Mpa	REMET 4.1/2″ METZKE 4.1″

Product detail pictures:

Related Product Guide:

We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for One of Hottest for Dth Pipe - Reverse Circulation Drilling Hammer Bit – TDS , The product will supply to all over the world, such as: Norwegian, Argentina, Dubai, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.

6 Dth Hammer

Air Compressor Atlas Large

Air Compressor Kaishan

Dhd380 Dth Hammer

Drilling Of Wells

Mission50

Portabl Diesel Air Compressor

Reverse Circulation Hammer Bit

Sandvik Drill Rod

Solid Rod Wiper

Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.

By Andrew from Singapore - 2017.09.30 16:36

This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!

By Ivy from belarus - 2017.09.22 11:32

Write your message here and send it to us